Discussion:
transfering files from windows 10 to hp50g
(too old to reply)
#5
2018-08-30 00:35:19 UTC
Permalink
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
Veli Pekka Nousiainen
2018-08-30 02:31:27 UTC
Permalink
Post by #5
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
https://www.hpcalc.org/hp49/pc/link/conn4x_b2361.zip
#5
2018-08-30 19:17:24 UTC
Permalink
Post by Veli Pekka Nousiainen
Post by #5
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
https://www.hpcalc.org/hp49/pc/link/conn4x_b2361.zip
I Only get the message device not found..Does it support USB 3? 64 bit Windows?
In what state need my calculator be when i hit connect?
Joe Horn
2018-08-31 11:58:23 UTC
Permalink
It should work. Press APPS 2 ENTER 5 ENTER and select USB and XModem then ENTER.
Then press and release the right-shift key, then press the right-cursor key.
See "Xmodem Server / Waiting for Command" in the display. The Conn4x program
should then connect. If not, try another port or cable (e.g. some USB cables are
for charging only and don't carry data). Good luck!

-Joe-
#5
2018-09-01 12:59:13 UTC
Permalink
Post by Joe Horn
It should work. Press APPS 2 ENTER 5 ENTER and select USB and XModem then ENTER.
Then press and release the right-shift key, then press the right-cursor key.
See "Xmodem Server / Waiting for Command" in the display. The Conn4x program
should then connect. If not, try another port or cable (e.g. some USB cables are
for charging only and don't carry data). Good luck!
-Joe-
Thanks for you guys help, but Conn4x won't even install, i was using the one recommended above and i can't connect, anyway, i will use SD card for my transfers, thanks a lot
Veli Pekka Nousiainen
2018-09-01 13:20:51 UTC
Permalink
ftp://ftp.hp.com/pub/calculators/Prime/
Joe Horn
2018-09-02 11:54:42 UTC
Permalink
Post by Veli Pekka Nousiainen
ftp://ftp.hp.com/pub/calculators/Prime/
That "Connectivity Kit" is for the Prime only. It won't help him with his HP 50g.

-Joe-
m***@gmail.com
2018-11-17 21:56:42 UTC
Permalink
Post by Veli Pekka Nousiainen
Post by #5
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
https://www.hpcalc.org/hp49/pc/link/conn4x_b2361.zip
Gracias Estimado

DavidM
2018-09-02 18:50:33 UTC
Permalink
Post by #5
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
Could this be of help?

http://www.hpmuseum.org/forum/archive/index.php?thread-5386.html
#5
2018-09-03 22:29:34 UTC
Permalink
Post by DavidM
Post by #5
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
Could this be of help?
http://www.hpmuseum.org/forum/archive/index.php?thread-5386.html
I managed to install the hp drivers for usb following the link above https://dottech.org/187598/how-to-install-unsigned-drivers-on-windows-10-and-8-1-guide/
but i still dont know how to transfer a file from windows 10 to hp50g
#5
2018-09-03 22:42:26 UTC
Permalink
Post by #5
Post by DavidM
Post by #5
None of the programs in hpcalc.org seem to work with windows 10 to transfer a file via USB from PC to HP50G
Could this be of help?
http://www.hpmuseum.org/forum/archive/index.php?thread-5386.html
I managed to install the hp drivers for usb following the link above https://dottech.org/187598/how-to-install-unsigned-drivers-on-windows-10-and-8-1-guide/
but i still dont know how to transfer a file from windows 10 to hp50g
oh i got it, right shift, release, right arrow then run program conn4xb2361.exe
Loading...